Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Irvine, CA: What They Cost and How Long They Take
Impact window installation in Irvine typically runs $8,000 – $25,000 for a whole-house package, and most homes take three to six working days from demo to final inspection once materials land. The work means pulling the old builder-grade units, reframing where the rough opening has shifted, setting laminated glass in tested frames, sealing and flashing to Irvine’s stucco details, then passing city inspection. Call (888) 578-4462 for a free on-site estimate.
How We Run an Impact Window and Door Job, Stage by Stage
Every Irvine project moves through the same five stages. Here’s what actually happens, when, and what you decide along the way.
Stage 1: Measure, permit, and material order (week one to week three)
We measure every opening, not just the ones on your list, because impact glass changes the frame profile and a 1970s stucco tract home in Woodbridge rarely has square rough openings. You decide the glass package (tempered laminated vs. standard laminated), frame material, and whether doors get multi-point locking hardware. Lead times on custom impact units run three to six weeks, and that wait, not the install, is what most Irvine homeowners underestimate. Plan check with the city’s building division usually takes two to three weeks on its own.
Stage 2: Protection and demo (day one)
Furniture gets moved and covered, floors get protection, and the crew pulls the first set of units. Expect a working day’s worth of noise and dust per four to six openings. Old aluminum or single-pane vinyl comes out whole where possible so the frame pocket stays clean. You’ll want to be reachable that morning to confirm any window that turns out to be a different size than the plan.
Stage 3: Reframing and flashing (days one to two)
This is where Irvine jobs differ from inland work. Stucco homes need the new frame integrated with the existing weather-resistive barrier, and that means cutting back stucco around each opening, adding flashing, and planning the stucco patch before the window ever goes in. Skipping that step is how you get water intrusion on the first Santa Ana wind event of the season. Homeowners don’t need to decide anything here, but this is the stage worth walking with us.
Stage 4: Set, seal, and hardware (days two to four)
Units go in, get shimmed and squared, and get sealed inside and out. Door hardware, screens, and any interior trim go on the same pass. Multi-slide and French door units take longer than fixed windows, so a home with four exterior doors often runs a day or two past a window-only job. You’ll confirm glass labels match what you ordered before we sign off.
Stage 5: Stucco, paint, and inspection (days four through six)
Exterior patches get floated, textured to match, and painted. The city inspector signs off on the permit, and we walk the whole job with you. Anything on the punch list gets handled before final payment. That final walkthrough is also when we hand over the window manufacturer’s warranty paperwork alongside our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Impact windows and doors are not one product. The decisions below move both the price and how the job holds up over the next thirty years in Irvine’s UV-heavy, dry-heat climate.
- Laminated glass, standard vs. upgraded interlayer: Standard laminated glass meets impact code and blocks UV. A stiffer interlayer holds together better under repeated stress but adds to the per-opening cost. On a west-facing wall in Northwood baking through August, the upgrade earns its keep.
- Vinyl vs. aluminum vs. wood-clad frames: Vinyl is the workhorse for Irvine tract homes, affordable and low-maintenance. Aluminum is slimmer and holds up outdoors but conducts heat. Wood-clad, like the Andersen and Marvin lines we install, matches Mediterranean-revival aesthetics and costs more per opening.
- Fixed vs. operable vs. sliding: Fixed units cost the least and give the best impact rating. Operable casement and sliding units cost more and carry more hardware to maintain. Sliding patio doors are the single biggest line item on most jobs.
- Door hardware and locking: Impact-rated exterior doors need multi-point locks and reinforced frames to hit their rating. It’s not optional if you want the system to perform.
- Interior trim and finish: Drywall return, wood casing, or a hybrid. It’s a cosmetic call, but it changes labor hours.
What Impact Windows & Doors Cost in Irvine, CA
Full-house impact window installation lands at $8,000 – $25,000 in Irvine, and that spread comes from five variables more than anything else.
- Opening count and size: A compact condo near UCI might need eight openings; a Woodbridge two-story runs twenty or more. Count drives the number more than anything.
- Existing condition of the openings: Square, clean rough openings are cheap. Rotted framing or stucco cracking around every window adds reframing and patching labor.
- Frame and glass grade: Vinyl with standard laminated glass sits at the low end. Wood-clad frames with upgraded interlayers push toward the top of the range.
- Door scope: Adding a sliding patio door and two exterior doors can add several thousand dollars on its own.
- Permit and inspection scope: Standard window replacement permits run modest fees, but anything affecting egress or structural framing adds plan review time and cost.
A written estimate from us breaks out window units, door units, framing, stucco patch, paint, permits, and labor line by line, so the number you see is the number you pay. What it typically does not include is interior painting beyond the immediate opening, window coverings, or remediation of any water damage we find behind the stucco. Those get quoted separately once we see them. Impact windows & doors are also often part of a full Windows & Doors in Irvine scope if you’re replacing interior doors or trim at the same time.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to This Job
Irvine is a master-planned city, which means almost every one of these jobs happens inside a village-specific HOA and its architectural review process, not on a patchwork of independent lots. That’s true across Irvine, from Turtle Rock to the newer Spectrum-area condo clusters. Before we order a single unit, you’ll need written design review approval on frame color and style, and that approval usually takes longer than the city permit. On the city side, Irvine’s building division scrutinizes impact-rated product data sheets and installation details more closely than most neighboring jurisdictions.
The housing stock matters too. Villages like Northwood and Woodbridge are full of 1970s – 1980s stucco tract homes, and those builders used single-pane aluminum windows with minimal flashing detail. Those are exactly the units that leak first when Santa Ana winds hit. Along Irvine’s eastern and southern edges abutting open space, the city enforces wildland-urban interface fire-hardening rules, and interior contractors from other parts of the county routinely miss that requirement on their first plan check here. Your glazing labels, frame material, and venting details all have to line up with those rules.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in Irvine
A typical whole-house job runs three to six working days of install, plus three to six weeks of lead time for custom units and two to three weeks of city plan check. The install itself moves faster than the approvals and material lead time, so build the whole timeline into your planning. Call (888) 578-4462 to get a firm schedule based on your opening count.
Yes, Irvine requires a permit for window and door replacement, and the work is inspected against the approved product spec. We pull the permit and handle the inspection, which is a big deal to skip given how carefully Irvine’s building division reviews impact-rated glazing. Permits are included in our written estimate.
In most cases, yes. Full-frame replacement disturbs the interior finish at each opening, but it doesn’t move plumbing or structure. If you’re already considering larger openings or a wall removal, that’s the one time we’d flag a bigger scope, and it’s where our Windows & Doors team loops in structural review. Call (888) 578-4462 to talk through your specific openings.
Whole-home packages land at $8,000 – $25,000, and the biggest drivers are opening count, frame material, and whether you’re adding exterior doors. A single sliding door with impact glazing can add a few thousand on its own. Call (888) 578-4462 for a free line-item estimate for your exact home.
Every install we do is covered by our 730-Day Done Right Promise, which means if anything isn’t done right, we make it right. Window units also carry their own manufacturer warranty, and we hand off that paperwork at final walkthrough. Call (888) 578-4462 if you’re comparing warranty terms across bids.
Get a Free Impact Window and Door Estimate in Irvine
Impact windows and doors are a meaningful investment, and the numbers in Irvine vary enough that a real estimate beats a guess every time. Call (888) 578-4462 for a free on-site estimate. We’ll measure your openings, walk your frame options, and hand you a written line-item quote with permits and stucco work included. A live person answers every call, and we don’t do surprise change orders. If you’re also fencing the yard this year, homeowners often pair this with Aluminum Fence in Irvine or Iron Fence in Irvine and we can price both in the same visit.
Written by the team at Groundwork Construction Co.