Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Irvine, CA
Custom and geometric windows in Irvine are made to order, not pulled from a catalog, so arched, angled, round, and trapezoid shapes fit an opening that stock units can’t. They’re usually chosen for two reasons: a home with architectural shapes that demand a matching window, or an owner who wants a specific look on a wall that standard rectangles can’t deliver. We handle the measurement, the specification, and the install, and we do it under a 730-Day Done Right Promise. Call (888) 578-4462 and a live person picks up, any hour, any day. You can also start with our full Windows & Doors service page if you’re still weighing shapes and materials.
Irvine is full of homes where the window doesn’t sit in a plain wall. The city’s HOA architecture, Mediterranean-inspired elevations, and the way newer builds push toward taller, more varied glass all create openings that a fixed-size rectangle won’t solve. That’s where geometric work earns its keep. A single arch over an entry, a pair of radius-top units flanking a fireplace, a trapezoid following a sloping stair wall: these are the jobs we get called for most in Irvine neighborhoods like Woodbridge, Turtle Rock, and Northwood.
The case for hiring us instead of a general window store comes down to the details. We specify against a curated line of brands, including Andersen and Marvin for performance-matched units and CertainTeed and GAF on the exterior side where window surrounds tie into roofing and flashing. Our technicians have up to 12 years of experience, and we bring the same background-checked, uniformed crew to every job. Custom shapes have no slack in them. Get the radius or the angle wrong by a quarter inch and the unit won’t seat, the weather seal fails, and you’re living with air leaks through every Irvine summer.
Key Takeaways
- Custom and geometric windows are built to the opening, so the shape and fit are exact, not approximated.
- Irvine’s HOA and architectural-style homes make angled and curved windows common, especially on entry doors and feature walls.
- Pricing depends on shape, size, glass package, and whether you go wood, clad, or fiberglass, with free estimates and 0% financing for 18 months.
- Work is covered by the 730-Day Done Right Promise, and calls are answered by a live person 24/7.
When You Need Custom & Geometric Windows
Here are the situations that send Irvine homeowners looking for a made-to-order window rather than an off-the-shelf one.
- You have an arched or radius opening that a rectangular unit can’t fill. A half-round transom over a living room window is the classic example. The opening has a fixed curve, and anything but a custom radius-top unit leaves you with a glass gap or a hacked-in trim board that never looks right.
- You’re matching the original architecture of an older Irvine home. Mid-century and 1970s-era construction in parts of the city used angled bay windows, clerestory rows, and sloped-ceiling gables. Replacing those windows with squares changes the character of the house.
- A wall slopes, steps, or meets a roof line at an angle. Trapezoids and parallelograms fit stairwells and gable ends where a rectangle simply won’t. We measure the actual angle and pitch on site, since no drawing survives in a 40-year-old floor plan.
- You want a feature window in a remodel. A new great-room addition or a kitchen reconfiguration often calls for a shaped window as the visual centerpiece. That’s a design conversation, and we’re happy to have it during the free design consult.
- You’re replacing a single failed geometric unit without tearing out the whole wall. Older curved and angled windows weather first along the seals and glazing. A one-unit custom replacement keeps the rest of the façade intact.
- An HOA or architectural review committee requires a specific profile. Several Irvine communities dictate window profiles and sight lines. We build to those requirements so the approval doesn’t get kicked back at you.
Our Custom & Geometric Windows Process
Custom shapes are unforgiving, so the process is built around getting measurements exact before a single unit is ordered. Here’s how we run it from first call to final walkthrough.
- Site measure and shape capture. We come out, measure the opening, and profile the curve or angle against the actual wall. For arched and radius units we template the shape, because a tape measure alone won’t hold a curve to the tolerance the frame needs.
- Specification and material selection. We walk through frame material (wood, aluminum-clad, fiberglass), glass package for Irvine’s sun exposure, and finish, drawing from Andersen and Marvin for performance-matched units. Where window surrounds meet roofing or flashing, CertainTeed and GAF exterior products come into play so the wall assembly stays tight.
- Upfront pricing, no surprises. You get a written number before any work begins. The number you see is the number you pay. No vague allowances that balloon mid-job.
- Order and fabrication lead time. Custom windows are built after measurement, so there’s a real lead time. We tell you the expected window up front so you can plan around it.
- Installation and seal. The shaped unit is set, shimmed, and sealed by background-checked, uniformed technicians. Getting a geometric frame plumb and square inside a curved opening is the whole game, and it’s where our techs’ up to 12 years of experience matters most.
- Final walkthrough and the promise. We walk the job with you, check operability and seal, and hand off under the 730-Day Done Right Promise. If it’s not done right, we make it right.
If the job is broader than a window or two, we also cover the full-scope work under our home construction and remodeling services so you’re not coordinating three separate trades for one wall.
Custom & Geometric Windows Pricing in Irvine
Custom and geometric windows in Irvine typically run higher than standard rectangular replacements, because every unit is built to the opening. Most single custom shapes land in a broad range depending on material, glass, and complexity, with larger or more unusual shapes pushing toward the top. Here’s how the line items break down so you can plan:
| Item | Typical Range (Irvine) |
|---|---|
| Single custom rectangular unit (clad or fiberglass) | Entry-level custom pricing, built to size |
| Arched or radius-top unit | Premium over rectangular, curve adds fabrication |
| Trapezoid or angled unit | Premium over rectangular, angle and pitch add work |
| Large feature / multi-panel geometric assembly | Highest tier, multiple custom units combined |
| Installation and finish | Quoted per opening with the unit |
Exact Irvine market numbers are quoted on site, because the range depends on the shape, the glass package, and how the wall is built. A few things move the number:
- Shape complexity. A half-round is easier to fabricate than a compound curve or a set of matching trapezoids.
- Frame material and finish. Wood and clad frames cost more than basic fiberglass and need finishing.
- Glass and coating package. Irvine’s sun load makes low-E and solar-control glass worth the upcharge for comfort and energy.
- Access and wall condition. Second-story shapes, rotten framing behind the old unit, or a wall that needs structural adjustment before the new custom window goes in.
- Number of units in a matched set. Ordering several shaped windows together is usually more efficient per unit than a single one-off.
Every estimate is free and comes with a design consult. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, which helps when you’re replacing several geometric units or pairing windows with doors in the same project. Call (888) 578-4462 for your free estimate, and remember a live person answers whenever you call.
For context on how windows fit with the rest of your Irvine home’s exterior, our Irvine service area page covers the trades we handle across the city.
FAQs – Custom & Geometric Windows
How much do custom and geometric windows cost in Irvine?
Custom and geometric windows in Irvine are priced higher than standard rectangular replacements because each unit is fabricated to the exact opening, and the final number depends on shape, frame material, glass package, and access. We quote on site and give you a written price before any work starts, with free estimates and 0% financing for 18 months available. Call (888) 578-4462 for an exact quote on your opening.
Is it cheaper to replace a geometric window or change the opening to a standard rectangle?
Replacing the shaped unit is usually the smarter call, but it depends on the wall and the surrounding architecture. Changing an arched or angled opening to a rectangle means cutting and re-framing the wall, re-finishing the interior and exterior, and often fighting the original design. A custom unit built to the opening avoids all that demolition and preserves the home’s look. We’ll give you both scenarios in writing so you can compare total cost, including finish work, before you decide.
Can you come today to measure my Irvine home?
We’ll get a technician out to measure your Irvine opening as soon as scheduling allows, and we answer calls 24/7, so you’re never left waiting until Monday morning. Custom shapes need a site template, so the first step is a measurement visit; from there we specify the unit and quote it. Call (888) 578-4462 to set up your free estimate and design consult. Estimates are free.
What’s covered if the custom window doesn’t fit right or fails?
Workmanship is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to your geometric window install the same as any other job. Manufacturer coverage on the unit itself runs through the window brand. Call (888) 578-4462 and we’ll walk you through the exact coverage on your estimate.
Custom and geometric windows are a fit-and-finish job where the margin for error is thin, and Irvine’s architectural variety makes that especially true. You get a live person on the phone 24/7, background-checked and uniformed technicians on site, upfront pricing with no surprises, and a written 730-Day Done Right Promise behind the work. Financing at 0% for 18 months and $1,000 off projects over $10,000 make a multi-window project easier to absorb. Call (888) 578-4462 today for your free estimate and design consult, and we’ll get your shaped windows measured, specified, and built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine.